28-G & 28-1, Jalan Suria Puchong 4,
Pusat Perniagaan Suria Puchong,
47110 Puchong,
Selangor, Malaysia.
+6012-234 0081
- Constant Temperature & Drying Oven
- High Temperature Furnace
- Industrial Equipment
- Plasma Equipment
- Incubator
- Freeze Dryer & Cooling Trap
- Sterilizer
- Water Purifier
- Constant temperature bath
- Water Circulator
- Heater
- Rotary Evaporator
- Vacuum / Pressurize Pump
- Emulsifier, Stirrer, Shaker
- Granulating & Spray Drying
- Washer
- Fume Hood
- Clean Bench & Safety Cabinet
- Dry Ice Cleaning
- Extraction Machine
- Cleaning Equipment
- Dyeing Equipment
- Auxiliary Chemical
- OEM Services
- Mixer
Renetech Sdn Bhd
28-G & 28-1, Jalan Suria Puchong 4,
Pusat Perniagaan Suria Puchong,
47110 Puchong,
Selangor, Malaysia.
28-G & 28-1, Jalan Suria Puchong 4,
Pusat Perniagaan Suria Puchong,
47110 Puchong,
Selangor, Malaysia.
Spray Dryer (Large Capacity)(DL411C)
| Previous | 1 / 2 | Next |
- Yamato DL411C
- Large Spray Dryer
- Pilot Scale Spray Dryer
- Industrial Spray Dryer
- High Capacity Spray Dryer
| Product Summary |
| Brand-new upgraded large spray dryer that efficiently recovers 100μm micro-particles. |
| Features |
| This device can obtain 10~100μm micro-particles, which are considered very difficult to obtain on laboratory spray dryer devices |
| Purposes of this device: It can be used in production preparatory experiments, high-value sample experiments, capsule spray drying method application research, and as an alternative method to traditional drying methods in general laboratories |
| It adopts a high-efficiency two-fluid nozzle spray method and a large drying chamber, compared with other products, the sample adhesion amount in the DL411C drying chamber is less, and the drying chamber is designed with a special cold air inlet to effectively prevent spray particles from refluxing and adhering upwards |
| The large hard glass drying chamber is very convenient for observing the spray and particles status |
| The nozzle head can automatically perform pulse cleaning at set intervals |
| The wide range of temperature settings for the hot air inlet can improve processing capacity and experimental efficiency |
Specification
| Feature | Specification |
| Model | DL411C |
| Applicable samples | Water-soluble & organic solvent (requires organic solvent recovery device) |
| Moisture evaporation capacity | Max. 3000ml/h |
| Spray and hot air contact method | Vertical downward spray and flow method |
| Liquid feed pump | Adjustable from 0 to 70 ml/min |
| Temperature setting range | 0¡«300¡æ |
| Temp. adjusting accuracy | Inlet temperature ±1¡æ |
| Drying air volume adjustment range | 0.12¡«1.0 m³/min |
| Spray air flow adjustment range | 0¡«30L/min |
| Spray pressure range | 0.3¡«0.6Mpa |
| Size Internal diameter | 457 × height 975 mm (glass part) |
| Material | Drying chamber, cyclone unit, and product container: ultra-hard glass; piping: stainless steel and silicone |
| External output | Inlet temperature, outlet temperature output (4¡«20mA) |
| Temperature regulator | Multi-PID control |
| Touch screen | Temp regulation, blower, heater, liquid delivery pump, pulse jet switch, automatic needle cleaning, alarm, operational curve |
| Control switch | Inlet temperature, outlet temperature control switch |
| Temperature sensor | PT100 thermistor |
| Heater | 2.0KW × 2 |
| Spray air pump | External compressor (sold separately) or via GAS510C recovery device |
| Suction blower | Brushless Blower |
| Filter | Suction filter, exhaust filter |
| Solvent recovery | Using solvent recovery device GAS510C (sold separately) |
| Spray air connection | Joint outer diameter, Φ7mm |
| Exhaust vent diameter | Φ50mm |
| Safety functions | Overheating protection (inlet/outlet), pump reverse function, overcurrent leakage protection, independent heater overheat preventer |
| External dimensions | W1080 × D850 × H1770mm |
| Weight | Approx. 180kg |
| Power Source | 200-230V ~ 50/60HZ 23-27A |
| Accessories | see Accessory llist for detail |