28-G & 28-1, Jalan Suria Puchong 4,
Pusat Perniagaan Suria Puchong,
47110 Puchong,
Selangor, Malaysia.
+6012-234 0081
- Constant Temperature & Drying Oven
- High Temperature Furnace
- Industrial Equipment
- Plasma Equipment
- Incubator
- Freeze Dryer & Cooling Trap
- Sterilizer
- Water Purifier
- Constant temperature bath
- Water Circulator
- Heater
- Rotary Evaporator
- Vacuum / Pressurize Pump
- Emulsifier, Stirrer, Shaker
- Granulating & Spray Drying
- Washer
- Fume Hood
- Clean Bench & Safety Cabinet
- Dry Ice Cleaning
- Extraction Machine
- Cleaning Equipment
- Dyeing Equipment
- Auxiliary Chemical
- OEM Services
- Mixer
Renetech Sdn Bhd
28-G & 28-1, Jalan Suria Puchong 4,
Pusat Perniagaan Suria Puchong,
47110 Puchong,
Selangor, Malaysia.
28-G & 28-1, Jalan Suria Puchong 4,
Pusat Perniagaan Suria Puchong,
47110 Puchong,
Selangor, Malaysia.
ARC-40H
| Previous | 1 / 2 | Next |
High efficiency of material charging for small volume syringes
- Able to charge materials into 3ml, 5ml and 10ml syringes, which are too small to charge manually.
- Up to 4 syringes can be charged at one time effectively.
- Capable for materials from low to high viscosity.
- The process from mixing and defoaming to charging is integrated by THINKY products.
- Easy to clean
ARC-40H is developed for the purpose of easy, quick and bubble free charging materials after mixed, defoamed and dispersed by THINKY MIXER. Small syringes such as 3ml, 5ml and 10ml can be used. The simple configuration allows for easy cleaning.
Specification
Specification
|
Unit Dimensions/ Unit weight
|
H550×W200×D140£¨mm£© Approx. 7.5kg(Up to the handle height) |
|
Maximum Capacity*1
*1£ºTotal mass to mount on the cup holder, including materials, containers, and adapters.
|
fills four 10 ml syringes at once |
| Max Processing | Simultaneous filling of four 10 ml syringes**Consult us for 20, 30, and 50 ml syringes.We will provide customization |
|
Standard Container*2
*2£ºContact us because the actual volume of mixing may vary depending on the containers, materials, and conditions.
|
Specially designed containers 300 ml |
| Power Supply | Instruction Manual × 1Specially designed container 300 ml(Container × 2, Inner lid × 2, Outer lid×2)Vacuum head × 1,Plug × 3Piston × 2,Syringe cap 3 of each Syringe cap with check valve 3 of each Cleaning container set (Cleaning container × 2, lid × 2, rubber ring × 2 ) |