28-G & 28-1, Jalan Suria Puchong 4,
Pusat Perniagaan Suria Puchong,
47110 Puchong,
Selangor, Malaysia.
+6012-234 0081
- Constant Temperature & Drying Oven
- High Temperature Furnace
- Industrial Equipment
- Plasma Equipment
- Incubator
- Freeze Dryer & Cooling Trap
- Sterilizer
- Water Purifier
- Constant temperature bath
- Water Circulator
- Heater
- Rotary Evaporator
- Vacuum / Pressurize Pump
- Emulsifier, Stirrer, Shaker
- Granulating & Spray Drying
- Washer
- Fume Hood
- Clean Bench & Safety Cabinet
- Dry Ice Cleaning
- Extraction Machine
- Cleaning Equipment
- Dyeing Equipment
- Auxiliary Chemical
- OEM Services
- Mixer
Renetech Sdn Bhd
28-G & 28-1, Jalan Suria Puchong 4,
Pusat Perniagaan Suria Puchong,
47110 Puchong,
Selangor, Malaysia.
28-G & 28-1, Jalan Suria Puchong 4,
Pusat Perniagaan Suria Puchong,
47110 Puchong,
Selangor, Malaysia.
ARE-500
| Previous | 1 / 4 | Next |
Medium-size, general-purpose model supporting upgrade to a maximum of 500ml capacity and production
- Supports upgrading from smaller models
- High-durability drive system suitable for production
- Maximum of 500ml or 1.1kg of material can be simultaneously mixed and deaerated
- A wide range of adapters extending the variations of containers usable (syringes, barrels, and disposable containers)
- Cold-insulated, heat-resistant adapter supporting various characteristics of materials
- Memory and step-operation functions for controlling operating conditions
Feature
Medium-size, general-purpose model for upgrading from a smaller model. The highly durable drive system employed is developed assuming high-frequency use including production. The rotation radius increasing effect and optimized rotation-revolution ratio improves mixing performance, and the deaeration performance is as good as the smaller models. It is mainly employed for uses that require batch-processing of a certain amount and processing of materials whose issue is uniform dispersion, including mixing and deaeration of urethane resin, even mixing of suspension, as well as preparation of alumina slurry.
Specification
Specification
| Unit Dimensions/ Unit weight | H692×W500×D500£¨mm£©Approx. 95kg |
|
Maximum Capacity*1
*1£ºTotal mass to mount on the cup holder, including materials, containers, and adapters.
|
1100g |
|
Standard Container*2
*2£ºContact us because the actual volume of mixing may vary depending on the containers, materials, and conditions.
|
650 ml resin container |
| Power Supply | Voltage: Single-phaseAC 100 V ± 10 %, 50/60 HzPower consumption:Approx. 50 VA (standby)Max 1400 VA (operation) |
| Accessories | Instruction Manual × 1AC cable (including 3P adapter) × 1,HDPE 550 ml container × 3,300 ml container × 3,Adapter for 300 ml container × 1(including 3 types of O-ring (1 each))Phillips screwdriver × 1,L-shaped wrench large × 1,L-shaped wrench small × 1,Spanner × 1,Hexagon head bolt M16 × 200(for carrying the unit) × 4 |
| Option | Mountain Stand |