28-G & 28-1, Jalan Suria Puchong 4,
Pusat Perniagaan Suria Puchong,
47110 Puchong,
Selangor, Malaysia.
+6012-234 0081
- Constant Temperature & Drying Oven
- High Temperature Furnace
- Industrial Equipment
- Plasma Equipment
- Incubator
- Freeze Dryer & Cooling Trap
- Sterilizer
- Water Purifier
- Constant temperature bath
- Water Circulator
- Heater
- Rotary Evaporator
- Vacuum / Pressurize Pump
- Emulsifier, Stirrer, Shaker
- Granulating & Spray Drying
- Washer
- Fume Hood
- Clean Bench & Safety Cabinet
- Dry Ice Cleaning
- Extraction Machine
- Cleaning Equipment
- Dyeing Equipment
- Auxiliary Chemical
- OEM Services
- Mixer
Renetech Sdn Bhd
28-G & 28-1, Jalan Suria Puchong 4,
Pusat Perniagaan Suria Puchong,
47110 Puchong,
Selangor, Malaysia.
28-G & 28-1, Jalan Suria Puchong 4,
Pusat Perniagaan Suria Puchong,
47110 Puchong,
Selangor, Malaysia.
ARE-400TWIN
| Previous | 2 / 4 | Next |
State of the art twin system that can vary the rotation- revolution ratio Achieves real time monitoring of material temperature
- Rotation and revolution independent variable mechanism mounted
- Twin system, Maximum Capacity 250ml/400g × 2 (gross)
- Mixing capacity can mix high-viscosity material such as viscous grease with viscosity 4,000Pa s
- Can use a sensor unit that can detect temperature of materials being mixed in real time (optional)
- Effective in setting recipes for materials that do not like temperature rise
- Through external PC connections, can display recipe settings, rotations during operation, and material temperature in real time (USB Type B standard equipment)
- Can remote control through external PC connections (optional RS485 terminal)
The built in mechanism can vary the ratio of rotation, while the twin system is newly developed. Mixes and deaerates a maximum 500 ml/800g of material (gross). This machine can set and reproduce optimal recipes for materials whose temperature is hard to control because it can detect material temperatures in containers in real time during operation with the combined use of the newly developed sensor unit incorporating non-contact sensors (optional). A PC connector (USB Type B) is installed on the back of the unit as standard equipment, achieving parameter setting, rotations during operation and temperature monitoring.
Specification
Specification
| Unit Dimensions/ Unit weight | H560×W460× D480£¨mm£© Approx. 7kg |
|
Maximum Capacity*1
*1£ºTotal mass to mount on the cup holder, including materials, containers, and adapters.
|
400g×2 |
|
Standard Container*2
*2£ºContact us because the actual volume of mixing may vary depending on the containers, materials, and conditions.
|
300 ml resin container |
| Power Supply | Voltage: Single-phaseAC 100 V ± 10 %, 50/60 HzPower consumption:Approx. 50 VA (standby)Max 1400 VA (operation) |
| Accessories | Instruction Manual × 1AC cable (including 3P adapter)×1,HDPE 300 ml container × 6,PC Management Software (Allows you to easily set / manage number of revolutions / number of rotations / operating time.)(Allows you to check the number of revolutions / processing / temperature on a PC in real time.)USB cable (TypeB) × 1L-shaped wrench (for M6) × 1,Key to unlock door during power failure × 1 |
| Option | Real-time temperature monitoringfunction (used with dedicatedsensor unit) |